DISH Network Satellite Antenna 1000.2

DISH Network HD dish 1000.2 Plus with Triple LNB
Dish 1000.2, Dp plus twin, & dp dual/single
WESTERN ARC LNBF - SATELLITES 110, 119 & 129
(NOTE - INCLUDED LNBF IS A FACTORY REMANUFACTURED UNIT)

UPGRADE TO EITHER A BRAND NEW DISHPRO PLUS OR HYBRID LNBF USING THE OPTIONS MENU

THE FOLDING LNB ARM KIT SHOWN IN THE PHOTO ABOVE IS NOT INCLUDED
BUT MAY BE ADDED AS AN OPTION. -- SEE BELOW.

KEY FEATURES

DISH 1000.2 includes a DP Plus Twin and a DP Dual (or DP Single) LNBF DISH 1000.2 allows customers to receive programming from three orbital locations; 110*, 119*, and 129* using a dish antenna size similar in size to DISH 500. DISH 1000.2 will display 1k.2 as the device and DPP 1000.2 as the LNBF when a Check Switch test has been run.

LNBF MAY BE UPGRADED TO A NEW, DISHPRO HYBRID TRIPLE LNBF WESTERN ARC (SATELLITES 110, 119, & 129) FOR USE WITH HOPPER AND WALLY SYSTEMS. USE OPTIONS MENU TO UPGRADE.
Wiring instructions for Hopper and Hybrid LNB

Dimensions:

• 1 5/8" mounting mast
• 20.7"h x 25.9"w dish face

  PLEASE NOTE - THIS DISH IS INTENDED TO BE MOUNTED ON A TRIPOD AND DOES NOT INCLUDE THE MOUNTING MAST.
  

  • DISH 1000.2 includes a DPP 1000.2 integrated LNBF - no switch needed for up to three receivers.
  • DPP 1000.2 integrated LNBF; 110*, 119*, 129*
  • Connect the three output ports of the DP Plus 1000.2 LNBF to a DISH Pro Plus 44 switch for an additional receiver. When connected to a DPP44 switch using 3 cables, the LNBF provides signal from 110*, 119*, and 129*.
    
  • The LNB input port is disabled if the Integrated LNBF is connected to a DPP44 switch; the 4th orbital in this configuration would have to be connected via the switch.

Improve your dish by adding our NEW - IMPROVED

Universal Folding LNB Arm Kit #2

You can also make dish adjustment easier by adding our

Satellite Dish Conversion Kit

Use the OPTIONS menu above to install either or both of these kits on your dish.

DOWNLOAD DISH ASSEMBLY AND USE INSTRUCTIONS