|Your cart is currently empty|
THIS KIT IS NO LONGER AVAILABLE.
WE RECOMMEND USING OUR UNIVERSAL FOLDING LNB ARM KIT #2
AS A REPLACEMENT.
This kit replaces all the adjustment hex nuts on your DirecTV Slimline satellite dish with wing nuts, eliminating the need for a wrench to loosen the hex nuts when making adjustments to the dish settings. It also adds hardware to allow the LNBF arm to be raised to a compact storage position without allowing the LNBF heads to contact the face of the dish, preventing damage to the heads. Easy conversion, takes less than a minute.
IMPORTANT - PLEASE READ - If the connection of the LNBF arm to the dish looks like the one in the picture below, using four, 5/16-18 hex bolts, then this kit will work on your Slimline dish. Please note that some older models used 1/4-20 hex bolts and other models use a welded connection. The kit will not work on those models. You should use the Universal Folding LNB Arm Kit on those dishes. This kit will allow the LNBF arm to be raised for storage and easy transport.
We now offer this kit in a DELUXE MODEL that replaces the standard wing nuts with T Knobs for an easier grip. Select the DELUXE MODEL from the pull-down options menu above.
Complete detailed instructions included.
PLEASE VISIT OUR FOLDING LNB KIT SELECTION PAGE TO ENSURE YOU SELECT THE CORRECT KIT FOR YOUR DISH
The Slimline dish is made in several model variations. The difference is in the manner the LNB arm connects to the frame. For this kit to work on your dish it must look EXACTLY like the photo above. If your dish is different you will need to use one of our other kits.
The Slimline dish is quite large and bulky with the LNB arm extended as above.
With the Slimline Folding LNB Arm Kit installed the dish takes up 50% less room when folded.
DOWNLOAD SLIMLINE DISH FOLDING LNB ARM KIT - No.1 INSTRUCTIONS PDF FILE 915KB