H&G ENTERPRISES
QUALITY PRODUCTS - MADE BY RVers FOR RVers

 LOCATED IN BEAUTIFUL SOUTHERN OREGON

  xmas.jpg (143659 bytes)

 
Flag-of-Canada.gif (1659 bytes)

This web page has been set up to allow our Canadian customers to take
advantage of the devalued U.S. dollar and get GREAT SAVINGS on our
products.  All item prices on this page are in U.S. dollars and are the same
prices we charge our U.S. customers.  The shipping and handling charges
have been adjusted for shipping to Canada.

Shipping to CANADA* by USPS Priority Mail
(Includes insurance)
So many of our Canadian customers have complained about the excess Brokerage
fees charged by UPS that we are now offering another alternative method of shipping
this item to Canada.  It is
our understanding that USPS rates are very competitive with
UPS, without the excessive brokerage fees.  Standard Customs Taxes still apply.

Shipments to Canada from the U.S. that are valued over U.S.$20.00 are
subject to taxes and/or duty  fees in addition to the shipping and
handling charges paid on the purchase.  These charges will be collected
by the carrier at the time of delivery and are the responsibility of the buyer.
Please feel free to email us with regard to these charges.

This email from one of our Canadian customers:

----- Original Message -----

From: Dale P

Sent: Saturday, March 15, 2008 8:29 AM

Subject: Thanks!!!

Hi George,

Just wanted to thank you for the great transaction we just had.  I couldn't believe that the tripod was delivered to my door in Canada in only 4 days!  I'm very happy with the product and am looking forward to using it in our 5th wheel (snow has to melt first).  Offering USPS as a delivery option instead of UPS is a great service since I wasn't charged any customs fees or brokerage fees.  I have found in the past that any purchases delivered by UPS were subject to $15-$20 brokerage fees.

Thanks again,

Dale

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Editor's note:  This may not be the case with all Canadian shipments.


 

dish_network_logo.jpg (8404 bytes)

DTVHD_title.jpg (5435 bytes)

starchoice_logo.gif (2391 bytes)

logo_Bell.gif (2345 bytes)
ExpressVu

FTA
Free-to-Air

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Selecting the correct tripod for your needs is very important.
CLICK HERE to visit our Tripod Selection page.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


eZEEscale.jpg (55806 bytes)

Now every H&G Heavy-Duty Tripod comes equipped with the
H&G eZEE-AIM© Tripod System

This simple, 2-step alignment system makes it very easy to aim your
satellite dish every time you set it up!

  eZee-aim2.jpg (342484 bytes)   eZee-aim3.jpg (259147 bytes)
       STEP 1                                                                   STEP 2
          
Step 1 - Install the Compass into the center hole of the tripod, align the sight-line with the center-line of the H&G eZEE-AIM© scale and turn the tripod to the correct azimuth setting.

Step 2 - Install the mast assembly and satellite dish, setting the index mark of the mast
assembly on the center-line of the scale.

The dish is now pointed within 2-3 degrees of the correct azimuth setting.

(COMPLETE DETAILED INSTRUCTIONS INCLUDED)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The H&G HEAVY-DUTY TRIPOD PACKAGE

hd-tripod-002.jpg (45487 bytes)

This Heavy-Duty Aluminum Tripod is designed specifically to
support large-size satellite dishes, such as the new
DirecTV Slimline HD Satellite Dish.

This tripod will support most standard and HD TV satellite dishes that have a mast size of either 1 5/8" or 2" diameter with a maximum weight of 35 lbs.
If in doubt about your dish, please email us with the make and model number.

This tripod was made to our specifications by CST/Berger, a leading manufacturer of industrial tripods and surveying equipment.

Each leg adjusts in length individually, making it easy to level the tripod's mounting platform using the circular bubble level supplied.

The tripod is securely anchored with the tie-down stake and heavy-duty bungee cord supplied, or you may use any of the alternate methods suggested in the instructions.

The removable mast assembly makes it easy to "pre-aim" the tripod, using the Coleman Lensatic Compass with the
H&G eZEE-AIM© Tripod System,
and be within 2-3 degrees of the correct azimuth every time.

When folded, the tripod is quite compact and measures 38"X6"X6"
It opens to a minimum height of 34" or a maximum height of 61"
(with a normal 32" leg spread).  The legs can be extended with a wider stance for greater stability in high-wind areas.

hd-tripod_005.jpg (49022 bytes)

hd-tripod 007.jpg (102028 bytes)

hd-tripod 7.jpg (45441 bytes)

hd-tripod-008.jpg (46845 bytes)

 
In addition to the Heavy-duty Tripod, with the
H&G eZEE-AIM© Tripod System, this  package includes the Coleman Lensatic Compass, a steel, tie-down stake; heavy-duty bungee cord; circular bubble level; 6" jack chain and the eZEE-AIM© removable Mast Assembly that adapts to either 1 5/8" or 2" dish mast sizes.


ANCHORING THE HEAVY-DUTY TRIPOD

anchor3.jpg (59733 bytes)
Fig. 1

anchor1.jpg (77967 bytes)
Fig. 2

anchor2.jpg (43695 bytes)
Fig. 3

The Heavy-Duty Tripod comes equipped with a ground screw stake and a strong bungee cord to make it easy to anchor when setting up on soft ground (Fig. 1).  When setting up on a hard surface (i.e. gravel or concrete), we recommend using a 5 gallon pail, filled with water, as ballast (Fig. 2).  When empty, the pail weighs less than 3 lbs, however, when filled with 5 gallons of water it weighs over 45 lbs.  The pail can also double as storage when not used as ballast.  The 5 gallon pails are easily available.  Fig. 3 shows the new, improved anchor hook on our heavy-duty tripod.  The anchor system shown in Fig. 2 allows this tripod to be used in a variety of setups, such as in an apartment that does not allow dishes to be attached to the building.   It can easily be set up on a porch or patio to comply with rental policies.


HEAVY-DUTY SATELLITE DISH TRIPOD

$99.95
+ $39.95 PRIORITY MAIL S&H

DOWNLOAD TRIPOD USE & CARE INSTRUCTIONS
PDF FILE 22.4KB

DOWNLOAD SLIMLINE DISH INSTALLATION MANUAL
PDF FILE 589.0KB


getacro.gif (1425 bytes)

Shipping information - click here.

 
   We recently received this email from:
   Lyndon L.
   Sioux Falls, SD 

   ----- Original Message -----
   From: Lyndon & Barb L.
   To: 'H&G Enterprises'
   Sent: Friday, September 05, 2008 6:11 PM
   Subject: HD Tripod

     George,

     I have received the HD Tripod and it works great!  The DirecTv
     installer was amazed at the quality of the tripod and stated that
     in all his installations on tripods, this was by far the best he has
     seen!

     Lyndon




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Purchases made on this web site use the secure
PayPal_logo.jpg (4020 bytes)
Shopping Cart System
and can be made using any major credit card,
even if you are not registered with PayPal.
Just follow the easy instructions during checkout.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

NEW!
Purchase only the
Mast Assembly Package and supply your own tripod.

ONLY $42.95 + $9.95 S&H

Now you can purchase just the mast
assembly package and get all the benefits of the H&G eZEE-AIM© alignment system. 

The tripod can be purchased at most Lowes and Home Depot stores.

Please read carefully the details below.

mast-package.jpg (354805 bytes)

We use the same tripod that is sold at both Lowes, Home Depot, and similar stores, however we make some modifications, such as adding a stronger hold down fixture to attach the bungee cord.  Please note that some earlier models of this tripod had a smaller center hole than the present 2 1/2" size.   This mast and compass will not fit in the smaller size hole. The stores often sell two styles - flat top and dome top.  Our mast system must be used on ONLY the flat top models.

MAST ASSEMBLY PACKAGE
$42.95 + $24.95 S&H

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

ALL ACCESSORIES LISTED BELOW
FOR THE HEAVY-DUTY TRIPOD RECEIVE

FREE SHIPPING
WHEN PURCHASED WITH THE TRIPOD OR MAST ASSEMBLY ABOVE

Tripod or Mast Assembly and accessories MUST be purchased at the same time and shipped together to use the FREE SHIPPING option.

Just add the tripod or mast assembly to your cart, then add as many of the accessories as you want, using the FREE SHIPPING option.

 
NEW
HEAVY-DUTY COMBO PACKAGE
$139.95
SPECIAL LIMITED OFFER!
CLICK HERE FOR DETAILS


SF95C+.jpg (78726 bytes)

~ LATEST MODEL! ~
JUST RELEASED!
SF-95c+ Satellite Finder
FEATURING BUILT-IN COMPASS
AND

H/V AND 22KHz INDICATOR LIGHTS

WITH FREE BONUS RG-6 COUPLER FITTING
RG-6.jpg (3552 bytes)

Monitors signal strength of any analog or digital signal

GREAT PRODUCT FOR RVers

Easily set up satellite dishes on RVs, motor homes, picnic tables, truck, decks, roofs or anywhere you want to set up your dish.  A tone provides the audio cues, while the lighted meter provides all the visual cues you will need to set up dish alignment in minutes.

Gain: 17dB Input Frequency: 950 ~ 2300 GHz.
Power: 13 ~ 18 VDC from receiver


SF-95c+ SATELLITE FINDER WITH RG-6 COUPLER
$10.95

PURCHASE FINDER WITH TRIPOD OR MAST ASSEMBLY - FREE SHIPPING!

PURCHASE FINDER WITHOUT TRIPOD OR MAST ASSEMBLY - $4.55 S&H

DOWNLOAD INSTRUCTIONS 29.0KB

getacro.gif (1425 bytes)

Shipping information - click here.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

AUXILIARY POWER SUPPLY KIT

Provides a power supply to the satellite finder independent of the power from
the dish receiver.  This allows a great deal of mobility when setting up the dish
in a remote situation.  Great accessory for RVers!


powercord2.jpg (39066 bytes)

This kit will supply power to any SF series Satellite Finder.
It will also supply power to other satellite finders with a 13-18 volt DC power requirement.
Requires two 9 volt alkaline batteries (not included).  Complete instructions included.

finder3.jpg (48705 bytes)

AUXILIARY POWER SUPPLY KIT
$5.95
Shipping information - click here.

PURCHASE POWER KIT WITH TRIPOD  OR MAST ASSEMBLY- FREE SHIPPING!

PURCHASE POWER KIT WITHOUT TRIPOD OR MAST ASSEMBLY - $2.98 S&H

DOWNLOAD AUXILIARY POWER KIT INSTALLATION INSTRUCTIONS
PDF FILE 548KB

getacro.gif (1425 bytes)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

COLEMAN®
LENSATIC  COMPASS
FOR
H&G HEAVY-DUTY TRIPOD

ACCURATE - EASY TO READ FIGURES

Mounts on top of tripod during setup.
Makes it EASY to AIM the tripod using the
H&G eZEE-AIM© Tripod System

When setting up their dish, most people often make the mistake of holding the compass in their hand, near the dish, and attempt to aim the dish in the direction the compass is pointing.   What they fail to realize is the dish is made of steel, which attracts the magnetic needle, throwing off the heading.

This compass has been specifically designed for use with the H&G eZEE-AIM© Tripod System above.  Simply insert the compass body ring into the center hole of the tripod, align it with the index mark and rotate the tripod to obtain the correct azimuth heading.  It can still be used as a hand-held compass.  Complete instructions are included.

compass.jpg (15077 bytes)
HD Compass2.jpg (61928 bytes)
compass5.jpg (13529 bytes)

 

COLEMAN LENSATIC COMPASS
$6.95

PURCHASE COMPASS WITH TRIPOD OR MAST ASSEMBLY - FREE SHIPPING!

PURCHASE COMPASS WITHOUT TRIPOD  OR MAST ASSEMBLY- $3.98 S&H

Shipping information - click here.

DOWNLOAD COLEMAN LENSATIC COMPASS USAGE INSTRUCTIONS

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Running out of storage space for your satellite dish?

The new H&G FOLDING LNB ARM KIT can save
you up to 50%* in storage space!

How long have you wished your LNB arm could do this?

HDFoldingLNBArm.gif (322032 bytes)

Now it CAN with the
H&G FOLDING LNB ARM KIT

The H&G FOLDING LNB ARM KIT allows the user to simply remove
one pin and fold up the LNB arm of the satellite dish for compact
storage and ease of transport.  All necessary hardware and
complete step by step detailed instructions are included in the kit.

This kit is designed for all dishes using the standard 1 7/8" X 7/8" rectangular LNB arm.

PLEASE NOTE: This kit requires you to modify the LNB arm of your dish
using a metal cutting hacksaw, electric drill, file and other hand tools.
If you are not able to use these tools you should not purchase this item.
If you have questions about the installation, please email us first.

You may download the instructions to see what the installation involves.

HDfolding1.jpg (33137 bytes)  HDfolding2.jpg (26434 bytes)

The new H&G FOLDING LNB ARM KIT can save
you up to 50%* in storage space!

*Actual folded size will vary with each make and model.  Dish shown is the DirecTV SlimLine model.

PURCHASE LNB ARM KIT WITH TRIPOD OR MAST ASSEMBLY - FREE SHIPPING!

PURCHASE LNB ARM KIT WITHOUT TRIPOD OR MAST ASSEMBLY - $3.95 S&H

 


SLIMLINE DISH CONVERSION KIT

This kit replaces all the adjustment hex nuts with wing nuts, eliminating the need for a wrench to loosen the hex nuts when making adjustments to the dish settings.  It also adds hardware to allow the LNBF arm to be raised to a compact storage position without allowing the LNBF heads to contact the face of the dish, preventing damage to the heads.

Easy conversion, takes less than a minute.

slimline-kit1.jpg (22534 bytes)

IMPORTANT - PLEASE READ
If the connection of the LNBF arm to the dish looks like the one above,
using four 5/16-18 hex bolts, then this kit will work on your SlimLine dish.
Please note that some older models used 1/4-20 hex bolts and other
models use a welded connection. The kit will not work on those models.
You should use the Folding LNB Arm Kit shown above.

  hd-kit.gif (137264 bytes)

This kit will allow the LNBF arm to be raised for storage and easy transport.

SLIMLINE DISH CONVERSION KIT
$9.95

PURCHASE CONVERSION KIT WITH TRIPOD OR MAST ASSEMBLY - FREE SHIPPING!

PURCHASE CONVERSION KIT WITHOUT TRIPOD  OR MAST ASSEMBLY- $4.95 S&H

DOWNLOAD TRIPOD USE & CARE INSTRUCTIONS
PDF FILE 16.6KB


getacro.gif (1425 bytes)

Shipping information - click here.

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

HANDY CARRY BAG

Stores all your equipment in one place.
Convenient zipper closure - rugged construction.

bag3.jpg (10781 bytes)

HANDY CARRY BAG
$19.95

PURCHASE HANDY CARRY BAG WITH TRIPOD OR MAST ASSEMBLY - FREE SHIPPING!

PURCHASE HANDY CARRY BAG WITHOUT TRIPOD OR MAST ASSEMBLY - $6.95 S&H

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

LEG RESTRAINT FOR HEAVY-DUTY TRIPOD

The Heavy-Duty Tripod is very adept at adjusting to a level and plumb position under the most extreme setup conditions.   Each leg can be individually adjusted both in length and degree of spread to accommodate the most difficult setup conditions you might encounter.  When setting up on a very smooth or slippery surface you should use the LEG RESTRAINT to prevent the hard metal leg tips from slipping. The 20" Leg Restraint Kit provides a leg spread of 32" between leg tips. Folds for easy storage.

    hd-tripod010A.jpg (28332 bytes)  hd-tripod-012.jpg (18008 bytes)

LEG RESTRAINT KIT FOR HEAVY-DUTY TRIPOD

$7.95

PURCHASE LEG RESTRAINT KIT WITH TRIPOD  OR MAST ASSEMBLY- FREE SHIPPING!

PURCHASE LEG RESTRAINT KIT WITHOUT TRIPOD OR MAST ASSEMBLY - $6.95 S&H

DOWNLOAD TRIPOD USE & CARE INSTRUCTIONS
PDF FILE 14.5KB


getacro.gif (1425 bytes)

NEW H&G HEAVY-DUTY COMBO PACKAGE
SPECIAL LIMITED OFFER!

hd-tripod-combo-pkg.jpg (93426 bytes)

The H&G HEAVY-DUTY COMBO PACKAGE
Includes: heavy-duty tripod, with H&G eZEE-AIM© Tripod System, carry strap, convertible mast assembly, steel tie-down stake, heavy-duty bungee cord,
circular bubble level, 6" Jack Chain, Coleman Lensatic Compass,
SF-95c+ Satellite Finder, Leg Restraint Kit
and the Handy Carry Bag to store it all.

SPECIAL PRICE $139.95
(A $145.75 VALUE WHEN PURCHASED INDIVIDUALLY)


H&G HEAVY-DUTY COMBO PACKAGE
$139.95
+ $44.95 PRIORITY MAIL S&H

BACK

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FULL 30-DAY LIMITED WARRANTY

If, within thirty days of receiving this item, you find that it is not as described in the listing or does not function, you may return it for a full refund of the purchase price, less shipping, after notifying us of the problem by email at sales@tv4rv.com.  The thirty day period begins upon receiving the item, as documented by the Delivery Confirmation record.  Loss or damage in shipping is not covered by this warranty, but is covered by the shipping insurance that is automatically included with each shipment.

No other warranty is offered or implied.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

SHIPPING INFORMATION

The items shown on this web page calculate shipping charges to CANADA.

Shipping is by U.S.P.S. International Mail to Canada.

If faster service is required, contact us for shipping costs for
Express Mail or UPS Next Day Air or 2nd Day Air services.

Loss or damage in shipping is not covered by our Limited 30 Day Warranty.
Shipments made by USPS and UPS are automatically insured.

 

Back to the top

HOME